LINYI QUEEN IMP&EXP CO.,LTD.

Verticals/Standards 

Verticals/Standards 
Similar products
  • Hop-Up

    Hop-Up Brackets enable work to take place away from the main scaffold run, they are available in 1,2 and 3 board widths. Hop-Up Brackets are also very useful if the building is to be rendered as they ...

  • Kwikstage System

    The introduction of Working at Height regulations has increased the importance of providing scaffolding as a work, safety, and fall protection platform for environments where work will be conducted at...

  • Ladder Transom

    Ladder transom The ladder transom is used to provide an opening for a ladder to pass through inside the scaffold, allowing for internal access. Clamps at 90 degrees to ledgers to allow 1.2 metre steel...

Queen Kwikstage Verticals / standards are the vertical members of Kwikstage scaffolding system. They provide the vertical support for scaffolding. Queen Kwikstage standards use quality raw material sourced from known and reputed vendors.Kwikstage Standard set rosettes for Kwikstage ledgers, they'll be one for every 500mm. Our clients can avail customization solutions for this range. Queen Scaffold's Kwikstage System Scaffold is easy to assemble and improves labor productivity. This makes our Kwikstage System Scaffold is one of the most used and recognized Kwikstage scaffolding for sale on the market today. Queen Group will give you a perfect product, along with fast and knowledgeable service. You will know where to look for any other scaffolding or accessories that you might be in need in the future.

Verticals form the support or the uprights and are made from Standard Scaffold Tubes of 48.3 x 4 mm thick. They have a series of "V" pressed welded at nominal 500 mm on the tube to provide a location for ledger and transoms.

Our refurbished 9ft 9in Vertical Standards are inspected, shot blasted and galvanized to a high standard.

They come complete with spigot and "V" pressings to provide location points for Kwikstage ledgers (8ft or 6ft) and transoms (4ft 2" or 2ft 8").

Features of Verticals/Standards

Suitable for working platform and support system
Can also be made available in OEM configurations

Description of Verticals/Standards

Product Type Kwikstage Verticals/Standards
Tube Diameter 48.3mm
Tube Thickness 3.25mm
Vertical/Standard 500/1000/1500/2000/2500mm
Surface Finished Electro Galvanized/Hot Dip Galvanized/Powder Coated
Material Q345
Package In bulk or Steel Pallet, as your request, OEM accepted
Product Capacity 50 tons per day
MOQ 10 tons
Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:0086-18653976938
  • FAX:+86 0539 2800891
  • EMAIL:info@lyqueen.com
  • ADDRESS:IEC 1711-1712 Shanghai Road, Lanshan District, Linyi City, Shandong Province, China