LINYI QUEEN IMP&EXP CO.,LTD.

Self-Climbing Formwork

Self-Climbing Formwork
Similar products
  • Single Side Formwork

    Single Sided Bracket DescriptionThe single-sided bracket is used in the formwork structure of single-sided wall concrete pouring. It is convenient, simple to operate and widely applicable. The maximu...

  • H 20 Timber Beam

    H 20 Timber BeamThe most easy and flexible slab formwork system for all types of slabs, consisting of steel props, tripod stands, fork heads, H20 timber beams and shuttering panel. The system can be u...

  • H20 Flex Formwork System

    H 20 Flex Formwork System This system is ideal for use with different slab thicknesses,as only the statically necessary parts are used.Loose plywood plates, supported by H20 girders,(cross girders) se...

Climbing formwork is a special type formwork for vertical concrete structures that rises with the building process. It can be an effective solution for buildings that are either very repetitive in form or that require a seamless wall structure.

The power of the self-climbing formwork is the hydraulic system, which includes the oil cylinder and commutators. Through the hydraulic syetem, the steel rail and bracket can climb up alternately. The comutators can control the climbing of the climbing rail and the bracket. The steel rail and bracket can inter-climbing, so the whole system will climb up steadily. Cranes are not needed during the construction. It is easy to operate, and climbing is fast and safe.

Product Characteristics

1. Perfect load bearing anchor system.
2. Crane-independent
3. One oil cylinder unit can lift 50KN.
4. The self climbing system can climb not only vertically but also slantwise, and the forward or backward inclination can be up to 18 degrees.
5. The system can climb up wholly or separately. The climbing process is steady, synchronous and safe.
6 .The bracket does not come back to the ground until construction work is finished, and spacing for work is reduced while the bumping damage is almost completely prevented, especially for the plywood.
7.The error of structure construction is tiny and easy to correct.
8.The formwork can climb up by itself and cleaning work can be done in site. The number of crane lifts are greatly reduced.

The power of the auto-climbing formwork is the hydraulic system, which includes the oil cylinder and commutators. Through the functioning of the hydraulic system, the steel rail and bracket can climb up alternately, The commutators can control the climbing of the climbing rail and the bracket. The steel rail and the bracket can inter-climbing, so the whole system will climb up steadily. Cranes are not needed during the construction. It' s easy to operate, and climbing is fast and safe.

Product Characteristics of Self-Climbing Formwork

1. Perfect load bearing anchor system.
2. Crane-independent
3. One oil cylinder unit can lift 50KN.
4. The self-climbing system can climb not only vertically but also slantwise, and the forward or backward inclination can be up to 18 degrees.
5. The system can climb up wholly or separately. The climbing process is steady, synchronous and safe.
6. The bracket does not come back to the ground until construction work is finished, and spacing for work is reduced while the bumping damage is almost completely prevented, especially for the plywood.
7. The error of structure construction is tiny and easy to correct.
8. The formwork can climb up by itself and cleaning work can be done in site. The number of crane lifts are greatly reduced.

Self-Climbing FormworkSelf-Climbing Formwork

Climbing Process Introduction of Self-Climbing Formwork

1. Set up the formwork by wall-through tie-rods and pull-push props, embed anchors and do the first concrete pouring.
2. Remove the formwork after the first pouring and fix anchor shoes on the finished wall, lift the brackets and formwork to the right position, match the formwork and do the second pouring.
3. Lift formwork and brackets to the higher floor; fix climbing rail and hydraulic system.
4. Match the formwork to the right position and do the third pouring.
5. Strip the formwork and fix anchor shoes on the finished wall, then let the climbing rails climb.
6. Brackets climb up to the right position, then install suspended platform.
7. Match the formwork, do the concrete pouring, and proceed into the standard climbing stage.

Self-Climbing Formwork
Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:0086-18653976938
  • FAX:+86 0539 2800891
  • EMAIL:info@lyqueen.com
  • ADDRESS:IEC 1711-1712 Shanghai Road, Lanshan District, Linyi City, Shandong Province, China