LINYI QUEEN IMP&EXP CO.,LTD.

H20 Flex Formwork System

H20 Flex Formwork System
Similar products
  • Circular Wall Formwork

    Circular Wall Formwork is designed for forming circular walls, applied to sewage treatment plants, spiral ramps in car-parks and circular tanks.·AdjustabilityRadius can be adjusted continuously by r...

  • Self-Climbing Formwork

    Self-Climbing Formwork Introduction The power of the auto-climbing formwork is the hydraulic system, which includes the oil cylinder and commutators. Through the functioning of hydraulic system, the...

  • H16 Formwork Beam

    H 16, H20 Formwork Timber Beam Raw Material:pine LVL for flange,poplar plywood for web.Glue:100%WBP phenolic glueDensity:5.0-6.0kgs/m3size:flane 40mm*80mm*length Web: 27*150*length Height:200mmWat...

Flex Formwork System is the easiest and most flexible formwork system for all types of slabs consisting tubular steel props. This system is ideal for use with different slab thicknesses, as only the statically necessary parts are used. Loose plywood plates, supported by H20 girders, (cross girders) serve as decking. The same H20 girders are used as main girders to support the cross girders. The same parts can be used in both directions.

The flexibility of the system is ability to adapt to various different room sizes, comes from the overlapping of the H20 girders. It is of no significance whether the girders are used as main girders or cross girders. Overlapping in any dimension is possible in either direction. Similarly the main girders and cross girders can be turned in the statically required direction for slanting T-walls, wall abutments, bays, circular structures, etc.

This system is ideal for use with different slab thicknesses, as only the statically necessary parts are used. Loose plywood plates, supported by H20 girders, (cross girders) serve as decking. The same H20 girders are used as main girders to support the cross girders. The same parts can be used in both directions.

The flexibility of the system, i.e. its ability to adapt to various different room sizes, comes from the overlapping of the H20 girders. It is of no significance whether the girders are used as main girders or cross girders. Overlapping in any dimension is possible in either direction. Similarly, the main girders and cross girders can be turned in the statically required direction for slanting T-walls, wall abutments, bays, circular structures, etc.

H20 Flex Formwork System
Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:0086-18653976938
  • FAX:+86 0539 2800891
  • EMAIL:info@lyqueen.com
  • ADDRESS:IEC 1711-1712 Shanghai Road, Lanshan District, Linyi City, Shandong Province, China